DXSR-1508/EC: Supervised 8-Channel Receiver (433.92 MHz) (Discontinued)
Installation Manual
The DXSR-1504/EC and DXSR-1580/EC are four and eight channel supervised digital receivers with solid state outputs designed for use with Linear's DX and DXS Format /EC transmitters. These receivers can be used in a variety of security and remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the appropriate channel output activates. The channel outputs have three optional configurations; 3/4 second momentary toggle on/off, and latch until restored. Status and low battery outputs are for supervisory indications. Cutting jumpers select which channels require supervisory status reports from transmitters.
Each unit incorporates a high-sensitivity superheterodyne diversity receiver with two whip antennas. This type of receiver provides superior performance by preventing loss of signal due to multi-path interference.
In a typical installation, the receiver is connected to an alarm control panel, door strike, camera, high current relay or some other devices. Transmitters are used to activate or control the devices. The receiver should be mounted indoors or inside a weather resistant non-metallic housing for outdoor use.
Order number: SSR00073
