DXS-62A: Supervised 1-Button, 1-Channel Pendant/Wristband Transmitter (Discontinued)
The Model DXS-62A Supervised 1-Button, 1-Channel Pendant/Wristband Transmitter is a battery powered, miniature, water-resistant, supervised transmitter designed for use in emergency applications with Linears DX and DXS Format receivers. For increased battery life, the DXS-62A contains larger batteries than the Model DXS-62A and does not contain an audible sounder. Each transmitter is supplied with a wristband, a pocket clip, and an adjustable lanyard with breakaway release. Pressing the button on the transmitter sends a digital coded wireless signal to its companion receiver. To insure sending a complete signal, press the transmitter button for a minimum of two seconds.
Each DXS transmitter is factory set to a unique code, so no field coding is required. The one-button DXS-62A sends a signal when its button is pressed. This transmitter can send a signal for up to 30 seconds per activation. The red signal indicator on the transmitter lights when the unit is activated.
If status transmissions are enabled, they will be sent every two hours. Some receivers are able to use these signals, others are not.
Every two hours the transmitter tests for a low battery. This test takes place even if status transmissions have not been enabled. If the battery tests low, the transmitters red indicator will blink slowly and a low battery signal will be sent.
Each transmitter is sealed to provide water-resistance. The units battery is not replaceable. The transmitter should be discarded at the end of its battery life.
- Full RF supervision, field enabled
- Extra long-life lithium batteries
- Adjustable lanyard with breakaway release
- Pendant, Velcro strap, wristband, belt clip, or pocket clip configurations
- Visual activation indicator
- DXS format
- RF frequency: 315 MHz
- 1.25" W x 1.5" H x 0.375" D
- Order number: SST00090A